10/100 Base-TX to 100Base-FX (SC) Multi-Mode 2 km (1.24 mi)

1000 Mbps Gigabit Multi Mode Fiber Ethernet Media Converter SC 550m

Tripp Lite's NetCommander PS/2 Server Interface Module connects to the HD15 port and PS/2 ports on a computer/server and converts them to a single RJ45 connector. Ordinary Cat5e patch cables can then be used to connect the computer/server to the switch ports on a Tripp Lite B070 / B072-Series NetCommander Cat5 KVM switch. Use of Cat5e cables frees up space in the installation that would be filled by traditional thicker KVM cables. Eliminates the need for thicker heavier KVM cables Compact lightweight design Plug and Play; no software required No power supply required Allows a Server/CPU to be located up to 100ft away from the KVM switch System Requirements Server or CPU with a HD15 port and (2) PS/2 type connections A B070 / B072-Series NetCommander Cat5 KVM Switch Cat5e/6 cable; up to 100ft Package Includes 1 PS/2 Server Interface Module

10/100 Fiber to Ethernet Media Converter Multi Mode SC 2 km

The HDMI2DP DVI or HDMI to DisplayPort Converter converts an HDMI DVI or Mini DVI input signal into a DisplayPort (or Mini DisplayPort) output eliminating the cost of upgrading your source device hardware or purchasing a new display. With support for full HD resolutions up to 1920x1200 the HDMI2DP converter is the perfect solution for connecting devices that have an HDMI DVI single-link or mini DVI output such as video cards (desktop or laptop) video game consoles or home theater receivers to your DisplayPort-capable display. Backed by a StarTech.com 1-year warranty and free lifetime technical support.

1000Base-T to 1000Base-SX (SC) Multi-Mode 220 m (720 ft.)

The Tripp Lite NetCommander USB Server Interface Module connects to the HD15 port and USB port on a computer/server and converts them to a single RJ45 connector. Ordinary Cat5e patch cables can then be used to connect the server to the switch ports on a Tripp Lite B070 / B072-Series NetCommander Cat5 KVM switch. Use of Cat5e cables frees up space in the installation that would ordinarily be filled by traditional thicker KVM cables. Eliminates the need for thicker heavier KVM cables Compact lightweight design Plug and Play; no software required No power supply required Allows a Server/CPU to be located up to 100ft away from the KVM switch System Requirements Server or CPU with a HD15 port and a USB port A B070 / B072-Series NetCommander Cat5 KVM Switch Cat5e/6 cable; up to 100ft Package Includes 1 USB Server Interface Module

10/100 Multi Mode Fiber to Ethernet Media Converter ST 2km with PoE

10/100 Fiber to Ethernet Media Converter Multi Mode ST 2 km

DIAMOND WR300N 300Mbps 802.11n Wireless Repeater Range Extender Wireless Access Point and Wireless Bridge Device ... The WR300N wireless range extender and repeater will increase the range of your existing wireless coverage removing those wireless dead spots and or weak areas of your network. Small form factor lets you plug the unit directly to the wall socket without any additional cables. For frequent travelers you can bring your own wireless network on the road. Use in your hotel room to transform your wired Ethernet internet access into a mobile WIFI network to share with multiple notebooks and smartphones. 3 in 1 device Wireless Range Extender Receives weak wireless signals and extends the signal range to greater distances eliminating wireless dead spots. Standalone Wireless Access Point Create a wireless network by connecting the device to a wired router/cable modem or DSL modem. This small compact portable device can create wireless connectivity wherever you go. Use in your hotel room and turn a wired internet connection into a wireless internet connection. Wireless Bridge device Receives wireless signal from your home wireless network and convert to wired Ethernet connections for non wireless devices such as internet ready HDTV's gaming consoles (PS3) and internet ready blu-ray players.

1000 Mbps Gigabit Single-Mode Fiber Ethernet Media Converter SC 15km

10/100 Base-TX to 100Base-FX (ST) Multi-Mode 2 km (1.24 mi)

FACTORY DIRECT ONLY ITEM TFC-110S20D3 or TFC-110S20D5 Bi-Directional Single Strand Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX Port Auto-negotiates between 10 and 100Mbps connection speed and supports Auto-MDIX. The 100Base-FX port supports single-mode SC type connection. These converters provide the ability to fiber optically connect networks together over distances of up to 20km.

The D-Link DMC-300SC is a media converter designed to convert 100BASE-FX (SC) fiber to 100Base-TX copper media or vice versa.